صندوق برّاد إيجابي جديد Renault Master ديزل
عاجل- 17.22 M³
- 3 مقاعد الجلوس
- الضمان :nbSup1 شهر
- Gdańsk
|
معلومات رئيسية
|
|
|---|---|
|
ضمان المعدات
|
|
| مرجع الموقع: | 10699635 |
| هيكل العربة | عربة نفعية برّاد |
| هياكل فرعية | صندوق برّاد إيجابي |
| العلامة التجارية | Renault |
| السلسلة (العلامة التجارية : Renault) | Master |
| الحالة | جديد |
| تاريخ التسجيل الأول للعربة | 16/07/2026 |
| ضمان المعدات | نعم |
| مدة الضمان | :nbSup1 شهر |
| البلد | بولونيا |
| صانع | Renault |
حالة الأجهزة |
|
|---|---|
| الطاقة | ديزل |
شهادة ATP |
|---|
|
التعليق / المحاور |
|
|---|---|
| محاور | 2×4 |
أبعاد |
|
|---|---|
| حجم | 17.22 متر مكعب |
| سطح | 8.61 متر مربع |
الحمولة بالطن |
|
|---|---|
| الوزن الإجمالي المسموح به | 3.5 طن |
تجهيزات عربة نفعية Renault |
|
|---|---|
|
معلومات إضافية |
|
|---|---|
| نوع وحدة التبريد | كهربائي |
| البلد (السلسلة) | بولونيا |
| إصدارات ثاني أكسيد الكربون | 347 g/km |
| عدد مقاعد الجلوس | 3 |
مواصفات Renault Master |
|
|---|---|
| قيادة | مقود على اليسار |
| معايير الاتحاد الأوروبي | Renault أورو 6 |
| عدد الكيلومترات المقطوعة | 16 كلم |
أبعاد الصندوق |
|
|---|---|
| ارتفاع الصندوق | 2.0 أمتار |
| العرض الداخلي للصندوق | 2.05 أمتار |
| الطول الداخلي للصندوق | 4.2 أمتار |
علبة التروس ونظام نقل الحركة |
|
|---|---|
| علبة السرعة | صندوق تروس يدوي |
محرك |
|
|---|---|
| القوة | 170 حصان |
| قوة المحرك | 125 kW |
| سعة المحرك | 1997 سم مكعب |
تجهيزات المقصورة |
|---|
|
ملاحظات |
|---|
|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
مشاهدة الجميع
|
ملاحظات |
|---|
|
Airbag package (FAB02 SABG0 ABCXL) driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
معلومات رئيسية
|
|
|---|---|
|
ضمان المعدات
|
|
| مرجع الموقع: | 10699635 |
| هيكل العربة | عربة نفعية برّاد |
| هياكل فرعية | صندوق برّاد إيجابي |
| العلامة التجارية | Renault |
| السلسلة (العلامة التجارية : Renault) | Master |
| الحالة | جديد |
| تاريخ التسجيل الأول للعربة | 16/07/2026 |
| ضمان المعدات | نعم |
| مدة الضمان | :nbSup1 شهر |
| البلد | بولونيا |
| صانع | Renault |
حالة الأجهزة |
|
|---|---|
| الطاقة | ديزل |
شهادة ATP |
|---|
|
التعليق / المحاور |
|
|---|---|
| محاور | 2×4 |
أبعاد |
|
|---|---|
| حجم | 17.22 متر مكعب |
| سطح | 8.61 متر مربع |
الحمولة بالطن |
|
|---|---|
| الوزن الإجمالي المسموح به | 3.5 طن |
تجهيزات عربة نفعية Renault |
|
|---|---|
|
معلومات إضافية |
|
|---|---|
| نوع وحدة التبريد | كهربائي |
| البلد (السلسلة) | بولونيا |
| إصدارات ثاني أكسيد الكربون | 347 g/km |
| عدد مقاعد الجلوس | 3 |
مواصفات Renault Master |
|
|---|---|
| قيادة | مقود على اليسار |
| معايير الاتحاد الأوروبي | Renault أورو 6 |
| عدد الكيلومترات المقطوعة | 16 كلم |
أبعاد الصندوق |
|
|---|---|
| ارتفاع الصندوق | 2.0 أمتار |
| العرض الداخلي للصندوق | 2.05 أمتار |
| الطول الداخلي للصندوق | 4.2 أمتار |
علبة التروس ونظام نقل الحركة |
|
|---|---|
| علبة السرعة | صندوق تروس يدوي |
محرك |
|
|---|---|
| القوة | 170 حصان |
| قوة المحرك | 125 kW |
| سعة المحرك | 1997 سم مكعب |
تجهيزات المقصورة |
|---|
|
ملاحظات |
|---|
|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
مشاهدة الجميع
|
ملاحظات |
|---|
|
Airbag package (FAB02 SABG0 ABCXL) driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
عربة نفعية برّاد Iveco 35S14 DAILY
عربة نفعية برّاد محافظ على درجة الحرارة Nissan NV400 Chłodnia Izoterma Konvekta Thermo System
أحادي الحرارة Ford Transit Custom
متعدد الحرارة Iveco Daily